Pour savoir comment effectuer et gérer un dépôt de document, consultez le « Guide abrégé – Dépôt de documents » sur le site Web de la Bibliothèque. Pour toute question, écrivez à corpus@ulaval.ca.
 

Publication :
Modélisation de la stabilité dimensionnelle et des propriétés mécaniques du bois d’épinette noire

bul.contributor.advisor-marc100Achim, Alexis|=$aAchim, Alexis
bul.contributor.advisor-marc100Hernández, Roger|=$aHernández, Roger,$d1955-
bul.contributor.advisor-marc100Duchesne, Isabelle|=$aDuchesne, Isabelle
bul.contributor.author-marc100Paes Torquato, Luciane|=$aPaes Torquato, Luciane
bul.date.reception2021-02-17
bul.description.alirenoadg spbar
bul.faculteFaculté de foresterie, de géographie et de géomatique.
bul.identifier.controlNumber1240151882
bul.identifier.uuid0aae1e42-4ca8-4b00-9062-c3eaaa58e364
dc.contributor.advisorDuchesne, Isabelle
dc.contributor.advisorAchim, Alexis
dc.contributor.advisorHernández, Roger
dc.contributor.authorPaes Torquato, Luciane
dc.date.accessioned2021-03-01T08:02:29Z
dc.date.available2021-03-01T08:02:29Z
dc.date.issued2021
dc.date.updated20220224
dc.description.abstractLes propriétés de flexion et la stabilité dimensionnelle sont des propriétés déterminantes pour le potentiel d’utilisation du bois dans les structures de bâtiments et les produits à valeur ajoutée. Une connaissance détaillée des patrons de variation des propriétés du bois à l’intérieur de l’arbre est essentielle pour optimiser l’usage de cette ressource renouvelable et développer des produits hautement performants. L’objectif général de cette recherche doctorale était de caractériser et modéliser les patrons de variation des propriétés de flexion et de la stabilité dimensionnelle du bois à l’intérieur de l’arbre en fonction de différents paramètres (l’âge cambial, hauteur dans la tige, largeur des cernes) et en tenant compte de l’historique des peuplements. Cet objectif fut poursuivi au moyen des objectifs spécifiques suivants: décrire le patron de variation des propriétés physico-mécaniques de la moelle vers l’écorce (c.-à-d. en fonction de l’âge cambial) et dans l’axe longitudinal de la tige ; modéliser l’effet du taux de croissance radiale sur les propriétés physico-mécaniques ; modéliser l’effet de la masse volumique basale du bois sur les propriétés physico-mécaniques et examiner les différences entre les deux types de structures de peuplements (régulier et irrégulier). L’étude a porté sur l’épinette noire (Picea mariana [Mill.] B.S.P), une espèce de grande importance commerciale au Canada. Soixante arbres ont été échantillonnés dans 12 peuplements localisés au nord et au sud de la Côte-Nord, 30 arbres dans 6 peuplements de la région de l’Abitibi-Témiscamingue et 42 arbres provenant de la région du Lac-Saint-Jean. Une approche de modélisation statistique a été utilisée pour rapporter les paramètres de résistance à la flexion, de rigidité et de stabilité dimensionnelle à des variables telles que l'âge cambial et le taux de croissance annuel. Les peuplements ont été échantillonnés avec un temps connu depuis le passage du dernier feu, car cela est connu pour influencer la structure du peuplement et la croissance des arbres. Les résultats ont confirmé que l'âge cambial est clairement la source la plus importante de la variation en direction radiale des propriétés du bois, lequel pourrait être utilisé comme variable prédictive. La largeur des cernes annuels a eu une influence additionnelle faible pour expliquer les variations des propriétés mécaniques et celles de stabilité dimensionnelle. Le bois des arbres à croissance plus rapide des peuplements réguliers avait des propriétés mécaniques supérieures, et était moins stable en termes de dimensions. Les arbres à croissance lente issus de peuplements irréguliers pourraient produire du bois final moins dense, ce qui tendrait à diminuer les propriétésfr
dc.description.abstractBending strength, stiffness, and dimensional stability of wood are determining properties fortheir potential use in building structure and added-value products. A detailed knowledge of the variation patterns of the properties inside a tree is essential to optimize the use of this renewable resource and to develop high-performance products. This PhD project’s goal is to characterize and model the variation pattern for bending strength, stiffness, and dimensional stability within the tree as a function of different parameters (radial distance, the height ofthe stem, the ring width) and taking into account the history of the stands. This general objective was pursued by the means of the specific objectives to : 1) describe the variation pattern of the physico-mechanical properties from pith to the bark (i.e. as a function ofcambial age) and in the longitudinal axis of the stem; 2) model the effect of the radial growth rate on the physico-mechanical properties; 3) model the effect of the basic specific densityon the physico-mechanical properties and examine the differences between the two types of stand structures (regular and irregular). The study focused on black spruce (Picea mariana[Mill.] B.S.P.), a species of high commercial importance in Canada. Sixty trees were sampled in twelve stands located north and south of the North Shore region, thirty trees in six standsin Abitibi-Témiscamingue and forty-two trees from Lac Saint-Jean. This study used astatistical modelling approach to relate flexural strength, stiffness and dimensional stability parameters to variables such as cambial age and annual growth rate. The stands were sampled with a known time since the last fire because this is known to influence stand structure and tree growth. The results confirmed that cambial age is clearly the most important source ofradial direction variation in wood properties, which could be used as a predictive variable. The ring width had a small additional influence to explain the variations in mechanical and dimensional stability properties. The fast-growing wood in regular stands had superior mechanical properties and were less dimensionally stable. Slow-growing trees from unevenaged, irregular stands may produce less dense late wood, which would tend to reduce mechanical properties and increase the dimensional stability of the material. Thus, these properties may be affected by the patterns of intra-ring variation in wood density. The effect of stand type on the wood physico-mechanical properties may also be due to the presence of mild compression wood, which can occur in trees of layer origin or in trees subjected togreater or more complex mechanical stimuli. Analyses also indicate that wood density and cambial age measurements can be used to estimate dimensional stability and mechanical properties. In addition, prediction indices have shown that it is preferable to predict dimensional stability from MOE and cambial age measurements rather than opting for the opposite case, i.e., estimating mechanical properties from dimensional stability. These results could have practical implications for decision-making in forest management and wood allocation. The selection of forest stands to produce black spruce wood for either high dimensional stability or high mechanical properties may be an interesting option that emerges from our results. In general, the modelling results were able to clearly characterize the differences between the two types of stand structures. However, further fundamental researchis needed to elucidate the mechanisms of wood formation that are responsible for differences in properties related to the growth environment in these two types of stand, including the internal structure of growth rings and the ultrastructure and chemical composition of the cell wall of wood tracheids, in order to obtain a more complete tool of simulation of wood qualityfor black spruce.en
dc.format.extent1 ressource en ligne (xx, 147 pages)
dc.identifier.bacTC-QQLA-36779
dc.identifier.nothese36779
dc.identifier.other36779
dc.identifier.urihttp://hdl.handle.net/20.500.11794/68341
dc.languagefre
dc.rightshttp://purl.org/coar/access_right/c_abf2
dc.subject.rvmBois -- Propriétés mécaniquesfr_CA
dc.subject.rvmFlexion (Mécanique)fr_CA
dc.subject.rvmÉpinette noirefr_CA
dc.titleModélisation de la stabilité dimensionnelle et des propriétés mécaniques du bois d’épinette noire
dc.typethèse de doctorat
dc.type.legacyCOAR1_1::Texte::Thèse::Thèse de doctoratfr
dcterms.publisher.locationQuébec
dspace.accessstatus.time2024-03-20 18:29:40
dspace.entity.typePublication
etdms.degree.disciplineDoctorat en génie du bois et des matériaux biosourcés
etdms.degree.grantorUniversité Lavalfr_CA
etdms.degree.namePhilosophiæ doctor (Ph. D.)fr_CA
relation.isAdvisorOfPublication25cb8533-5324-4c7b-b585-59e8387cc035
relation.isAdvisorOfPublicationace0968e-c003-44bb-bdaf-88b7bcda54d6
relation.isAdvisorOfPublicationfbc68a53-e6a5-457b-830c-6c7ea4103beb
relation.isAdvisorOfPublication.latestForDiscovery25cb8533-5324-4c7b-b585-59e8387cc035
relation.isAuthorOfPublication370e39aa-6300-4a38-8dbd-4460d4d5f98d
relation.isAuthorOfPublication.latestForDiscovery370e39aa-6300-4a38-8dbd-4460d4d5f98d
relation.isResourceTypeOfPublicationea18b676-87ff-47c6-8d0d-fc3b87c36448
relation.isResourceTypeOfPublication.latestForDiscoveryea18b676-87ff-47c6-8d0d-fc3b87c36448

Fichiers

Bundle original
Voici les éléments 1 - 1 sur 1
En cours de chargement...
Vignette d'image
Nom :
36779.pdf
Taille :
6.82 MB
Format :
Adobe Portable Document Format
Description :