Pour savoir comment effectuer et gérer un dépôt de document, consultez le « Guide abrégé – Dépôt de documents » sur le site Web de la Bibliothèque. Pour toute question, écrivez à corpus@ulaval.ca.
 

Personne :
Laroche, Gaétan

En cours de chargement...
Photo de profil

Adresse électronique

Date de naissance

Projets de recherche

Structures organisationnelles

Fonction

Nom de famille

Laroche

Prénom

Gaétan

Affiliation

Université Laval. Département de génie des mines, de la métallurgie et des matériaux

ISNI

ORCID

Identifiant Canadiana

ncf10316941

person.page.name

Résultats de recherche

Voici les éléments 1 - 2 sur 2
  • PublicationAccès libre
    Deposition of anti-fog coatings on glass substrates using the jet of an open-to-air microwave argon plasma at atmospheric pressure
    (Wiley-VCH-Verl., 2020-04-22) Durocher-Jean, Antoine; Rodríguez Durán, Iván; Asadollahi, Siavash; Laroche, Gaétan; Stafford, Luc
    This study reports a one-step process for the formation of anti-fog coatings on commercial glass substrates using the jet of an open-to-air microwave argon plasma at atmospheric pressure with hexamethyldisiloxane (HMDSO) as the precursor for plasma-enhanced chemical vapor deposition. Optical microscopy and broadband light transmittance measurements revealed significant precursor fragmentation and gas phase association reactions when HMDSO was injected close to the tube outlet, resulting in powder-like, hydrophobic, and semiopaque glass surfaces. On the contrary, injection of HMDSO close to the substrate led to smoother, homogeneous, hydrophilic, and transparent glass surfaces. In addition, transmittance measurements at 590 nm in humid air according to American Society for Testing and Materials standard tests revealed superior antifogging properties to plasma-treated glass substrates. On the basis of the optical emission and absorption spectroscopy measurements, electrons, metastable argon atoms, and hot neutral argon atoms were mostly responsible for the significant precursor fragmentation close to the tube outlet, whereas the contribution of hot neutrals and ultraviolet photons became important close to the substrate.
  • PublicationAccès libre
    Atmospheric pressure townsend discharges as a promising tool for the one‐step deposition of antifogging coatings from N2O/TMCTS mixtures
    (Wiley, 2020-02-13) Laroche, Gaétan; Durocher-Jean, Antoine; Rodríguez Durán, Iván; Profili, Jacopo; Stafford, Luc
    The need to ensuring the “see‐through” property of transparent materials when exposed to sudden temperature changes or very humid conditions has encouraged the development of antifogging strategies, such as the deposition of (super)hydrophilic coatings. However, despite the effectiveness of these coatings in combating the effects of fogging, most of the coating techniques explored to date are typically time‐consuming and environment‐unfriendly. Bearing this in mind, we demonstrate that the application of dielectric barrier discharges operated at atmospheric pressure proves to be successful in preparing antifogging coatings on glass samples from 1,3,5,7‐tetramethylcyclotetrasiloxane (TMCTS) and nitrous oxide (N2O). The antifogging performance of the coatings was found to be governed by the [N2O]/[TMCTS] ratio and not by the [N2O] + [TMCTS] sum. Coatings prepared under a [N2O]/[TMCTS] = 30 were superhydrophilic (water contact angles ≈ 5°–10°) due to surface silanol groups and endowed glass samples with a superior antifogging property, as revealed by the ASTM F 659‐06 test. In contrast, because of the lesser hydrophilicity (water contact angles ≈ 60°), coatings prepared under a [N2O]/[TMCTS] = 10 did not endow glass samples with antifogging property. Regardless of the deposition conditions, the plasma‐deposited coatings displayed crack‐free smooth surfaces (Rrms = 2−4 nm).