Pour savoir comment effectuer et gérer un dépôt de document, consultez le « Guide abrégé – Dépôt de documents » sur le site Web de la Bibliothèque. Pour toute question, écrivez à corpus@ulaval.ca.
 

Personne :
Zhang, Hai

En cours de chargement...
Photo de profil

Adresse électronique

Date de naissance

Projets de recherche

Structures organisationnelles

Fonction

Nom de famille

Zhang

Prénom

Hai

Affiliation

Université Laval. Laboratoire de vision et systèmes numériques

ISNI

ORCID

Identifiant Canadiana

ncf11735155

person.page.name

Résultats de recherche

Voici les éléments 1 - 7 sur 7
  • PublicationAccès libre
    Comparative study of infrared thermography, ultrasonic C-scan, X-ray computed tomography and terahertz imaging on composite materials
    (2017) Zhang, Hai; Maldague, Xavier
    L’évaluation non destructive (NDT) des matériaux composites est compliquée en raison de la vaste gamme de défauts rencontrés (y compris délaminage, microfissuration, fracture de la fibre, retrait des fibres, fissuration matricielle, inclusions, vides et dommages aux chocs). La capacité de caractériser quantitativement le type, la géométrie et l’orientation des défauts est essentielle. La thermographie infrarouge (IRT), en tant que technique de diagnostic d’image, peut satisfaire le besoin industriel croissant de NDT&E. Dans la thèse, la thermographie par excitation optique et mécanique a été utilisée pour étudier différents matériaux composites, dont 1) des préformes sèches en fibres de carbone, 2) des composites de fibres naturelles, 3) des composites hybrides de basalte-fibres de carbone soumis à une charge d’impact (séquence de type sandwich et séquence d’empilement intercalé), 4) des défauts micro-dimensionnés dans un composite polymère renforcé de fibre de carbone (CFRP) en 3D avec une couture de type « joint en T », et 5) des peintures sur toile qui peuvent être considérées comme des matériaux composites. Une nouvelle technique IRT de thermographie de ligne par micro-laser (micro-LLT) a été proposée pour l’évaluation des porosités submillimétriques dans le CFRP. La microscopie de points par micro-laser (micro-LST) et la micro-vibrothermographie (micro-VT) ont également été présentées avec l’utilisation de microlentilles. La thermographie pulsée (PT) et la thermographie modulée « à verrouillage » (LT) ont été comparées à la tomographie par rayons X (TC) pour validation. Le C-scan ultrasonore (UT) et l’imagerie par ondes tera-hertziennes en onde continue (CW THz) ont également été réalisés à des fins comparatives. L’inspection par techniques thermographiques est une question ouverte à discuter pour le public scientifique. En fait, la thermographie par impulsions (PPT) basée sur la transformation de phase a été utilisée pour estimer la profondeur des dommages. Pour traiter les données thermographiques, on a également utilisé la reconstruction de signal thermographique de base (B-TSR), la thermographie des composants principaux (PCT) et la thermographie des moindres carrés partiels (PLST). Enfin, une analyse complète et comparative basée sur le diagnostic d’images thermographiques a été menée en vue d’applications industrielles potentielles.
  • PublicationAccès libre
    Comparative study of infrared thermography, ultrasonic C-scan, X-ray computed tomography and terahertz imaging on composite materials
    (2017) Zhang, Hai; Maldague, Xavier
    L’évaluation non destructive (NDT) des matériaux composites est compliquée en raison de la vaste gamme de défauts rencontrés (y compris délaminage, microfissuration, fracture de la fibre, retrait des fibres, fissuration matricielle, inclusions, vides et dommages aux chocs). La capacité de caractériser quantitativement le type, la géométrie et l’orientation des défauts est essentielle. La thermographie infrarouge (IRT), en tant que technique de diagnostic d’image, peut satisfaire le besoin industriel croissant de NDT&E. Dans la thèse, la thermographie par excitation optique et mécanique a été utilisée pour étudier différents matériaux composites, dont 1) des préformes sèches en fibres de carbone, 2) des composites de fibres naturelles, 3) des composites hybrides de basalte-fibres de carbone soumis à une charge d’impact (séquence de type sandwich et séquence d’empilement intercalé), 4) des défauts micro-dimensionnés dans un composite polymère renforcé de fibre de carbone (CFRP) en 3D avec une couture de type « joint en T », et 5) des peintures sur toile qui peuvent être considérées comme des matériaux composites. Une nouvelle technique IRT de thermographie de ligne par micro-laser (micro-LLT) a été proposée pour l’évaluation des porosités submillimétriques dans le CFRP. La microscopie de points par micro-laser (micro-LST) et la micro-vibrothermographie (micro-VT) ont également été présentées avec l’utilisation de microlentilles. La thermographie pulsée (PT) et la thermographie modulée « à verrouillage » (LT) ont été comparées à la tomographie par rayons X (TC) pour validation. Le C-scan ultrasonore (UT) et l’imagerie par ondes tera-hertziennes en onde continue (CW THz) ont également été réalisés à des fins comparatives. L’inspection par techniques thermographiques est une question ouverte à discuter pour le public scientifique. En fait, la thermographie par impulsions (PPT) basée sur la transformation de phase a été utilisée pour estimer la profondeur des dommages. Pour traiter les données thermographiques, on a également utilisé la reconstruction de signal thermographique de base (B-TSR), la thermographie des composants principaux (PCT) et la thermographie des moindres carrés partiels (PLST). Enfin, une analyse complète et comparative basée sur le diagnostic d’images thermographiques a été menée en vue d’applications industrielles potentielles.
  • PublicationAccès libre
    Eddy current pulsed thermography for ballistic impact evaluation in basalt-carbon hybrid composite panels
    (Optical Society of America, 2018-04-03) Zhang, Hai; Maldague, Xavier; Osman, Ahmad; Ibarra Castanedo, Clemente; Sarasini, Fabrizio; Sfarra, Stefano; Netzelmann, Udo; Perilli, Stefano
    In this paper, eddy current pulsed thermography was used to evaluate ballistic impact damages in basalt-carbon hybrid fiber-reinforced polymer composite laminates for the first time, to our knowledge. In particular, different hybrid structures including intercalated stacking and sandwich-like sequences were used. Pulsed phase thermography, wavelet transform, principle component thermography, and partial least-squares thermography were used to process the thermographic data. Ultrasound C-scan testing and X-ray computed tomography were also performed for comparative purposes. Finite element analysis was used for validation. Finally, an analytical and comparative study was conducted based on signal-to-noise ratio analysis.
  • PublicationAccès libre
    Comparative study on submillimeter flaws in stitched T-joint carbon fiber reinforced polymer by infrared thermography, microcomputed tomography, ultrasonic c-scan and microscopic inspection
    (Society of Photo-optical Instrumentation Engineers., 2015-10-15) Zhang, Hai; Hassler, Ulf; Maldague, Xavier; Ibarra Castanedo, Clemente; Robitaille, François; Genest, Marc; Fernandes, Henrique; Joncas, Simon
    Stitching is used to reduce dry-core (incomplete infusion of T-joint core) and reinforce T-joint structure. However, it may cause new types of flaws, especially submillimeter flaws. Microscopic inspection, ultrasonic c-scan, pulsed thermography, vibrothermography, and laser spot thermography are used to investigate the internal flaws in a stitched T-joint carbon fiber-reinforced polymer (CFRP) matrix composites. Then, a new microlaser line thermography is proposed. Microcomputed tomography (microCT) is used to validate the infrared results. A comparison between microlaser line thermography and microCT is performed. It was concluded that microlaser line thermography can detect the internal submillimeter defects. However, the depth and size of the defects can affect the detection results. The microporosities with a diameter of less than 54  μm are not detected in the microlaser line thermography results. Microlaser line thermography can detect the microporosity (a diameter of 0.162 mm) from a depth of 90  μm. However, it cannot detect the internal microporosity (a diameter of 0.216 mm) from a depth of 0.18 mm. The potential causes are given. Finally, a comparative study is conducted.
  • PublicationAccès libre
    An experimental and analytical study of micro-laser line thermography on micro-sized flaws in stitched carbon fiber reinforced polymer composites
    (Elsevier, 2016-04-01) Sheng, Yunlong; Yu, Ling Yao; Hassler, Ulf; Zhang, Hai; Maldague, Xavier; Robitaille, François; Genest, Marc; Joncas, Simon; Fernandes, Henrique; Holub, Wolfgang
    Stitching is used to reduce incomplete infusion of T-joint core (dry-core) and reinforce T-joint structure. However, it might cause new types of flaws, especially micro-sized flaws. In this paper, a new micro-laser line thermography (micro-LLT) is presented. X-ray micro-computed tomography (micro-CT) was used to validate the infrared results. The micro-LLT and micro-CT inspection are compared. Then, a finite element analysis (FEA) is performed. The geometrical model needed for finite element discretization was developed from micro-CT measurements. The model is validated for the experimental results. Finally a comparison of the experiments and simulation is conducted. The infrared experimental phenomenon and results are explained based on the FEA results
  • PublicationAccès libre
    Pulsed micro-laser line thermography on submillimeter porosity in carbon fiber reinforced polymer composites : experimental and numerical analyses for the capability of detection
    (Optical Society of America, 2016-08-08) Fleuret, Julien; Zhang, Hai; Maldague, Xavier; Hassler, Ulf; Ibarra Castanedo, Clemente; Robitaille, François; Djupkep Dizeu, Frank Billy; Genest, Marc; Fernandes, Henrique; Joncas, Simon
    In this article, pulsed micro-laser line thermography (pulsed micro-LLT) was used to detect the submillimeter porosities in a 3D preformed carbon fiber reinforced polymer composite specimen. X-ray microcomputed tomography was used to verify the thermographic results. Then, finite element analysis was performed on the corresponding models on the basis of the experimental results. The same infrared image processing techniques were used for the experimental and simulation results for comparative purposes. Finally, a comparison of experimental and simulation postprocessing results was conducted. In addition, an analysis of probability of detection was performed to evaluate the detection capability of pulsed micro-LLT on submillimeter porosity.
  • PublicationAccès libre
    Comparative study of microlaser excitation thermography and microultrasonic excitation thermography for submillimeter porosity in carbon fiber reinforced polymer composites
    (Society of Photo-optical Instrumentation Engineers, 2016-09-30) Zhang, Hai; Maldague, Xavier; Hassler, Ulf; Ibarra Castanedo, Clemente; Robitaille, François; Genest, Marc; Fernandes, Henrique; Joncas, Simon
    Stitching is used to reduce incomplete infusion of T-joint core (dry-core) and reinforce T-joint structure. However, it may cause new types of flaws, especially submillimeter flaws. Thermographic approaches including microvibrothermography, microlaser line thermography, and microlaser spot thermography on the basis of pulsed and lock-in techniques were proposed. These techniques are used to detect the submillimeter porosities in a stitched T-joint carbon fiber reinforced polymer composite specimen. X-ray microcomputed tomography was used to validate the thermographic results. Finally an experimental comparison of microlaser excitation thermography and microultrasonic excitation thermography was conducted.