Personne : Beck, Katherina
En cours de chargement...
Date de naissance
Projets de recherche
Nom de famille
Département de sciences du bois et de la forêt, Faculté de foresterie, de géographie et de géomatique, Université Laval
Résultats de recherche
Voici les éléments 1 - 3 sur 3
- PublicationRestreintDevelopment of a new engineered wood product for structural applications made from trembling aspen and paper birch(Forest Products Research Society, 2009-07-31) Beck, Katherina; Cloutier, Alain; Salenikovich, Alexander; Beauregard L., RobertThis study compared the bending performance of small (30 mm [1.2 in.] deep) laminated beams made from aspen oriented strand lumber (OSL), birch OSL, and commercial web-stock oriented strandboard (OSB) panels. Aspen OSL beams had an average modulus of elasticity (MOE) of 9.89 GPa (1.43 × 10^sup 6^ psi) and an average modulus of rupture (MOR) of 52.0 MPa (7.54 × 10^sup 3^ psi). The average MOE for birch OSL was 10.6 GPa (1.54 × 10^sup 6^ psi), and the average MOR was 58.4 MPa (8.47 × 10^sup 3^ psi). OSB laminated beams reached less than half of these values (5.17 GPa [0.75 × 10^sup 6^ psi] and 26.4 MPa [3.83 × 10^sup 3^ psi], respectively). Large (120 mm [4.72 in.] deep) laminated OSB beams were also tested to track the depth effect. The average MOR of aspen and birch OSL, adjusted to 120 mm depth, was estimated to be 46.7 MPa (6.77 × 10^sup 3^ psi) and 52.6 MPa (7.63 × 10^sup 3^ psi), respectively. Comparisons with laminated strand lumber products currently on the Canadian market showed the mechanical properties of this new product to be competitive
- PublicationRestreintComparison of mechanical properties of oriented strand board made from trembling aspen and paper birch(Springer, 2009-05-30) Beck, Katherina; Cloutier, Alain; Salenikovich, Alexander; Beauregard L., RobertThis study compared the performance of oriented strand boards (OSB) made from trembling aspen, a low-density hardwood species, and OSB made from paper birch, a medium-density hardwood species. The birch strands were thinner than the aspen strands to ensure a comparable specific surface. Three levels of adhesive content were used: 3.5%, 5.0%, and 7.0%. Internal bond (IB) and modulus of elasticity (MOE) and modulus of rupture (MOR) for flatwise and edgewise bending were determined. Both species performed equally well in IB (3.5% adhesive content: 0.46 MPa, 5.0%: 0.60 MPa, and 7.0%: 0.65 MPa). The values of MOE in flatwise bending were slightly lower for birch than for aspen panels (11.8 GPa for aspen and 10.6 GPa for birch), and the MOR values were not significantly different (combined 68.3 MPa). Edgewise bending properties were not significantly different for the two species with a MOE of 10.5 GPa and a MOR of 43.2 MPa.
- PublicationAccès libreEffect of strand geometry and wood species on strandboard mechanical properties(Society of Wood Science and Technology], 2009-07-01) Beck, Katherina; Cloutier, Alain; Salenikovich, Alexander; Beauregard L., RobertThis study compared the performance of strandboards made from trembling aspen, a lowdensity hardwood species, with strandboards made from paper birch, a medium-density hardwood species. Strands were cut into three different lengths (78, 105, and 142 mm) and two thicknesses (0.55 and 0.75 mm) to compare the impact of species, strand geometry, specific surface, and slenderness ratio. Internal bond (IB), modulus of elasticity (MOE), and modulus of rupture (MOR) for flatwise and edgewise bending, compressive strength, and stiffness were all determined. Both species performed equally well in IB (0.73 MPa for both species combined). The highest MOE and MOR values in flatwise and edgewise bending were obtained for long, thin strands and were significantly lower for birch than for aspen panels (flatwise: 13.6 GPa and 99.2 MPa for aspen and 12.1 GPa and 85.5 MPa for birch; edgewise: 13.5 GPa and 66.3 MPa for aspen and 13.2 GPa and 65.7 MPa for birch). Short aspen strands resulted in the highest compressive properties, slightly higher than those of short birch strands (aspen: compressive strength 10.4 MPa and stiffness 1.22 GPa; birch: 10.8 MPa and 2.25 GPa, respectively). Strand length must therefore be a compromise between the need for high bending properties provided by long strands and the need for high compressive properties provided by short strands.